PEXL फिल्टर बॅग -
PEXL Filter Bag, Wholesale PEXL Filter Bag manufaturer.
Extended Service Life PEXL Filter Bag A great cost saving filter bag with unique needle felt fiber construction that not only doubles the pore space within but significantly increases the dirt holding capacity in filtration performance without affecting its initial pressure drop, it gives you a lifetime of up to 5 times longer, resulting in filtration cost savings and labor cost savings. High process service life decreases downtime and reduces change-out costs.
Micron values for PEXL filtration filters range from 0.2 to 200 millimeters. Original as well as the standard 1, 2, 3, 4, and 5 versions are accepted. When others falter or clog, PEXL filtration bags continue to function. The ability of polyester and polyethylene to retain debris is improved. Long-life media uses a denser network of tiny fibers and a depth loading structure to increase filter life while maintaining effectiveness. These characteristics extend the lifespan of Long Life PEXL Filter Bags by up to five times compared to regular standard filter bags.
To meet process needs, COX PEXL Filter Bags are offered in polypropylene fabrics with various filtering rates. A low-cost throwaway media with depth-filtration capabilities and a high solids-loading capability is needle felt fabric. Heat treatment fixes the polypropylene strands in position to stop fiber movement.
Additional filtering depth can eliminate contaminants like delicate particulates and liquids that are difficult for regular felt media to get rid of. Because PEXL filtration bags are specifically thermally treated to avoid fiber movement, they can be used for a variety of uses, including covering for automobiles. A unique fiber mix arrangement is used in COX Long Life Polyester materials to produce a media that is heavy, denser, and sturdier than typical felted media. The improved yields of this composition are achieved without raising the starting atmospheric pressure.
Size No. | Diameter | Length | Flow Rate | Filter Area | Volume |
# 01 | 180mm | 420mm | 20m3/h | 0.25m2 | 8.0 L |
# 02 | 180mm | 810mm | 40m3/h | 0.50m2 | 17.0 L |
# 03 | 105mm | 235mm | 6m3/h | 0.09m2 | 1.30 L |
# 04 | 105mm | 385mm | 12m3/h | 0.16m2 | 2.50 L |
# 05 | 150mm | 550mm | 18m3/h | 0.20m2 | 3.80 L |
The full-weld method, which provides unmatched seal security and superior filtrate consistancy, is offered for PEXL filter bags. Numerous filtration bag housings can accommodate rings and flange top bags made of steel and stainless steel. Increased bag strength and undesirable bypass are prevented by the fully welded structure. To make pulling out the filtration bag easier, ring bags can optionally have handles or draw tabs sewed in.
SKU | Style No. | Micron Rating | SKU | Style No. |
PEXL-1-P01H | PEXL-1-PO1E | 1 | PEXL-1-P02H | PEXL-1-P02E |
PEXL-5-P01H | PEXL-5-P01E | 5 | PEXL-5-P02H | PEXL-5-P02E |
PEXL-10-P01H | PEXL-10-P01E | 10 | PEXL-10-P02H | PEXL-10-P02E |
PEXL-25-P01H | PEXL-25-P01E | २५ | PEXL-25-P02H | PEXL-25-P02E |
PEXL-50-P01H | PEXL-50-P01E | 50 | PEXL-50-P02H | PEXL-50-P02E |
PEXL-100-P01H | PEXL-100-P01E | 100 | PEXL-100-P02H | PEXL-100-P02E |
Fluid viscosities and contaminants can vary greatly in PEXL Filter Bag. Welded Filter Bags for Liquid Filtration: Fiber movement is significantly reduced or eliminated thanks to impregnable welded joints, which also enhance filtration when combined with a glazed surface on the filter bag. Welded seams are preferable to stitched seams for some uses. The weld seam filter sacks for liquid filtering have a fully bonded flange top, bottom, and sides. No stitching is done, and no thread is used. Polyester, polyethylene, nylon, Nomex, and PTFE are among the materials used to make felt filtration bags. To reduce fiber migration from the filter surface, filtration felts are also offered with glazed or singed exterior finishes.
Material | Work Temperature | Micron Retention Ratings Available | |||||||||||||
0.2 | 0.5 | 1 | 5 | 10 | २५ | 50 | 75 | 100 | 150 | 200 | 250 | 300 | 400 | ||
PO | <80℃ | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
पीई | <120℃ | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ||||
POXL | <80℃ | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |||
PEXL | <120℃ | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ||||
NOMEX | <200℃ | ● | ● | ● | ● | ||||||||||
PTFE | <260℃ | ● | ● | ● | ● |
PEXL Filter bags are ideal for removing gels, irregular shaped particles in liquid streams with a wide particle size distribution. COX PEXL Filter Bags are available in designs that comply with both FDA and EC requirements for food and beverage contact.
PEXL Filter Bag Tags : PEXL फिल्टर बॅग, PEXL Filter Bags, PEXL Long Life Filter Bag, PEXL Long Life Filter Bags
एक प्रत्युत्तर द्या